The influence of lower extremity postures on kinematics and injuries of cyclists in vehicle side collisions

Objective: A cyclist assumes various cyclic postures of the lower extremities while pushing the pedals in a rotary motion while pedaling. In order to protect cyclists in collisions, it is necessary to understand what influence these postures have on the global kinematics and injuries of the cyclist.

Method: Finite element (FE) analyses using models of a cyclist, bicycle, and car were conducted. In the simulations, the Total Human Model of Safety (THUMS) occupant model was employed as a cyclist, and the simulation was set up such that the cyclist was hit from its side by a car. Three representative postures of the lower extremities of the cyclist were examined, and the kinematics and injury risk of the cyclist were compared to those obtained by a pedestrian FE model. The risk of a lower extremity injury was assessed based on the knee shear displacement and the tibia bending moment.

Results: When the knee position of the cyclist was higher than the hood leading edge, the hood leading edge contacted the leg of the cyclist, and the pelvis slid over the hood top and the wrap-around distance (WAD) of the cyclist's head was large. The knee was shear loaded by the hood leading edge, and the anterior cruciate ligament (ACL) ruptured. The tibia bending moment was less than the injury threshold. When the cyclist's knee position was lower than the hood leading edge, the hood leading edge contacted the thigh of the cyclist, and the cyclist rotated with the femur as the pivot point about the hood leading edge. In this case, the head impact location of the cyclist against the car was comparable to that of the pedestrian collision. The knee shear displacement and the tibia bending moment were less than the injury thresholds.

Conclusion: The knee height of the cyclist relative to the hood leading edge affected the global kinematics and the head impact location against the car. The loading mode of the lower extremities was also dependent on the initial positions of the lower extremities relative to the car structures. In the foot up and front posture, the knee was loaded in a lateral shear direction by the hood leading edge and as a result the ACL ruptured. The bicycle frame and the struck-side lower extremity interacted and could influence the loadings on lower extremities.     

Identification of microbial populations contributing to nitrification-associated nitrous oxide emission during cattle manure composting process with forced aeration

Journal of Material Cycles and Waste Management - This study was conducted to clarify the fates of whole nitrogen cycle-associated microorganisms during laboratory-scale composting of cattle manure...     

Empirical analysis of reward to return: based on case studies of lunch boxes in Japan

To recycle or reuse used containers, it is necessary first to collect them. One way to do this is to give rewards to persons who return used packaging and containers to designated places. Many Japanese university cooperatives use recyclable lunch boxes for take-out food, and they collect used boxes in a variety of ways, including such reward giving. By analyzing the responses of university cooperatives to questionnaires on the ways that they collect used recyclable lunch boxes, this study examines the effect of this reward giving on the collection rate. The study results suggest that cash rewards are more effective in increasing the rate of return of used containers than setting up collection boxes that offer no rewards upon return, or giving point-based rewards.     

Estimating monthly total nitrogen concentration in streams by using artificial neural network

Artificial Neural Network (ANN) is a flexible and popular tool for predicting the non-linear behavior in the environmental system. Here, the feed-forward ANN model was used to investigate the relationship among the land use, fertilizer, and hydrometerological conditions in 59 river basins over Japan and then applied to estimate the monthly river total nitrogen concentration (TNC). It was shown by the sensitivity analysis, that precipitation, temperature, river discharge, forest area and urban area have high relationships with TNC. The ANN structure having eight inputs and one hidden layer with seven nodes gives the best estimate of TNC. The 1:1 scatter plots of predicted versus measured TNC were closely aligned and provided coefficients of errors of 0.98 and 0.93 for ANNs calibration and validation, respectively. From the results obtained, the ANN model gave satisfactory predictions of stream TNC and appears to be a useful tool for prediction of TNC in Japanese streams. It indicates that the ANN model was able to provide accurate estimates of nitrogen concentration in streams. Its application to such environmental data will encourage further studies on prediction of stream TNC in ungauged rivers and provide a useful tool for water resource and environment managers to obtain a quick preliminary assessment of TNC variations.     

Concentrations of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls in blood collected from 195 pregnant women in Sapporo City, Japan

We measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), non-ortho coplanar polychlorinated biphenyls (non-ortho PCBs), and mono-ortho coplanar polychlorinated biphenyls (mono-ortho PCBs) in blood collected between 2002 and 2004 from 195 pregnant women living in Sapporo City of Hokkaido Prefecture, Japan. The present study is one of the few studies in which PCDDs, PCDFs, and dioxin-like PCBs have been measured in the blood of pregnant women. Of the 195 pregnant women, 101 were primipara (mean: 28.8 years) and 94 were multipara (mean: 32.4 years). The arithmetic mean total TEQ concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs of primiparous and multiparous mothers in Sapporo City were 17.4 (median: 15.7) and 14.0 (median: 13.9)pgTEQ/glipid, respectively, and the concentrations were in the range of 6.6-43.4 and 3.4-28.2pgTEQ/glipid, respectively. In regard to the relationship between the total TEQ concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in maternal blood and the number of deliveries or age of primiparous and multiparius mothers, the levels of these dioxin-like compounds tended to decrease with increases in the number of deliveries and significantly increased with increasing maternal age in both groups. Furthermore, significant correlations were observed between the total TEQ concentrations of these dioxin-like compounds and the age of primiparae and multiparae. The total TEQ concentration of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs measured in 195 pregnant women has decreased compared to past levels in Japan for the last several decades. The results of the present study have indicated that dioxin contamination in the blood of young women in Japan is continuing to decrease.     

Life cycle assessment of integrated recycling schemes for plastic containers and packaging with consideration of resin composition

Many life cycle assessment studies have evaluated and compared the environmental performance of various technologies for recycling plastic containers and packaging in Japan and other countries. However, no studies have evaluated the combination of recycling technologies in consideration of the resin composition in terms of the quantity of each recycled product so as to maximize their environmental potential. In this study, 27 scenarios of recycling schemes for household waste plastic containers and packaging are developed through integrating a conventional recycling scheme with additional recycling schemes. The conventional recycling scheme involves municipal curbside collection and either the material recycling or feedstock recycling of waste plastics. The additional recycling schemes are feedstock recycling in steel works of the residue from conventional material recycling processes, and corporate voluntary collection and independent material recycling of specific types of plastic trays. Life cycle assessment based on the modeling of recycling processes considering the resin composition in terms of the quantity of each recycled product is applied to evaluate and compare these scenarios from the viewpoints of fossil resource consumption and CO₂ emission. The results show that the environmental loads are reduced in all scenarios including the additional recycling schemes compared with the conventional recycling scheme. However, the independent plastic tray recycling scheme exhibits lower additional environmental savings when the residue recycling scheme is integrated with the conventional material recycling scheme. This is because both additional recycling schemes aim to utilize polystyrene and polyethylene terephthalate, which would otherwise be incinerated as residue from material recycling processes. The evaluation of the environmental loads of plastic recycling with consideration of the resin composition in terms of the quantity of each recycled product makes it possible to investigate recycling schemes that integrate different technologies to maximize their environmental potential.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.